Cut the skirting to length, mitring the corners, and either pin or glue it to the wall. Don't forget to leave the 10mm expansion/contraction gap between the edge of the floor and the wall.

Do NOT glue the skirting to your floor - your floor must be allowed to move freely underneath the beading.

It's best to glue the skirting to the wall so use an adhesive with good grab strength.

Where the length of the skirting required exceeds the length of the skirting section (i.e. 2700mm), either butt the two lengths tight up to one another or cut one length at 45º and the other at 135º and then glue the two angles together to form a flush joint.

A 2700mm x 65mm x 20m solid oak skirting board available unfinished, oiled, or as an exact match to your chosen floor. The perfect finish around the edge of your room!

The ideal solution for finishing off your floor and getting that professional look.

Key features:

2700mm 65mm x 20mm oak skirting board, ideal for finishing off around the edge of a room
Solid oak skirting board available unfinished, oiled, or as an exact match to your chosen floor
Easy to fit - use Griptite to glue to your wall
Covers the standard expansion/contraction gap with ease

Skirting details
Size	Overall size - 2700mm x 65mm x 20mm
Material	Solid oak oak skirting available unfinished, oiled, or as an exact match to your chosen floor
Installation method	Apply a bead of Griptite to the rear of the skirting board and then press in place against your wall. N.B. Do NOT glue to the floor - your floor must be allowed to move freely under the skirting board.