Cut the beading to length, mitring the corners, and either pin or glue it to the existing skirting or wall. Do NOT pin or glue the beading to your floor - your floor must be allowed to move freely underneath the beading.

Gluing is best so use an adhesive with good grab strength. Where the length of the beading required exceeds the length of the beading (i.e. 2400mm), either butt the two lengths tight up to one another or cut one length at 45º and the other at 135º and glue together.

Wherever necessary, return the beading as shown in the diagram rather than leaving an exposed edge.

A white scotia beading for the perfect finishing around your floor, ideal for all engineered floors!

Simple to glue or pin to existing skirtings and cill sections to give your floor that professional look.

Key features:

2400mm x 16mm x 16mm white beading
MDF core
Covers the standard 10mm expansion/contraction gap with ease
Can be glued or pinned to skirtings and cills
Can be painted afterwards if required

Scotia bead details
Bead size	2400mm x 16mm x 16mm scotia
Material	MDF core wrapped with white paper laminate
Installation method	Glue or pin to existing skirting board - do NOT fix to the floor