First of all cut the floor for the riser to the correct length and height, and then glue in place using Griptite. Secondly, cut the floor and the stair nosing to the correct length and depth for the tread when joined together and glue in place as shown. Finally finish off where the tread meets the riser at the back of the step with a matching length of scotia beading.

Choose from twelve matt-lacquered coloured finishes for this solid oak stair nosing for 14mm click engineered floors. Available in 900mm and 2700mm lengths, this is the perfect finish for stairs!

The ideal solution for finishing off your floor and getting that professional look.

Key features:

Overall size - 900mm or 2700mm x 60mm x 28mm oak stair nosing
Actual size when installed - 900mm or 2700mm x 56mm x 28mm oak stair nosing
Solid oak click stair nosing available in twelve matt-lacquered coloured finishes
Suitable for a 14mm floor height
Easy to fit - clicks into your floor and then use Griptite to glue down to your staircase

Choose from any one of these twelve stunning finishes:

Golden Brown	Streaky Grey	Cloudy Oak	Ebony
Blond Oak	Burnt Oak	Dark Grey	Classic Oak
Tudor Oak	Mahogany	Light Golden Oak	Stormy Oak

Threshold/trim profile details
Size	900mm or 2700mm x 60mm x 28mm
Material	Solid oak profile available in twelve matt-lacquered coloured finishes
Installation method	Apply a bead of Griptite to the tread and riser of your staircase and then press in place