	Roll out the underlay with the logo uppermost, making sure that there are no gaps and that the edges of the underlay butt up tight to each other. No adhesive is necessary and a Vapourstop tape should be used to seal the edges together. Lay the underlay parallel to the direction of the LVT floor.
	Lay the LVT floor on top without any adhesive (i.e. as a floating floor) and click the joints together.

A pressure-resistant 1.55mm thick polyurethane underlay, specially designed for vinyl floors in rooms with high temperature variations, such as conservatories or rooms with floor-length windows.

This pressure-resistant foam underlay has been designed for use with underfloor heating and for vinyl floors in rooms with high temperature variations, such as conservatories or rooms with floor-length windows. Just roll it our across the room making sure the edges butt up to each other, and then lay your new floor on top.

Key features:

1.55mm thick pressure-resistant recycled polyester foam
10 metres long x 1 metre wide - 10 square metres per roll
Suitable for use in any room
Excellent sound insulation - dB rating = 16dB
Excellent heat transfer and ideal for use with underfloor heating
Designed for use on all sub-floors
Loose lay - does not need to be glued down

Roll details
Roll size	10 metres x 1metre - 10 square metres per roll
Roll thickness	1.55mm
Material	Polyurethane
Sound reduction	16dB
Installation
Installation method	Roll out across the sub-floor with the logo uppermost. Make sure there are no gaps and that the edges butt up to each other. No adhesive is necessary and use a Vapourstop tape to seal the edges together. Lay the roll parallel to the direction of the LVT floor.
Suitable for use with under-floor heating	Yes