Loose lay the fibreboard panels, making sure that they butt up tight to each other, until they cover the whole room and then lay your new floor on top. Remember to use a vapour barrier on a concrete sub-floor.

A rigid, dense foam fibreboard underlay, made from natural fibres and ideal for all Sun engineered floors!

This 5mm rigid fibreboard underlay is loose-laid on all sub-floors with the boards butting up tight to each other. It levels out unevenness in sub-floors, reduces footfall noise and limits heat loss. Just lay the rectangular boards across the room making sure there are no gaps between them, and then lay your new floor on top.

Key features:

5mm dense, rigid fibreboard underlay
Made from natural fibres
Board size - 856mm x 600mm
19 boards in a pack = 9.76 square metres coverage
Good sound insulation - 20dB sound reduction
Absorbs sub-floor imperfections
Must be used with a vapour barrier if used on concrete sub-floors
Loose lay - does not need to be glued down
Suitable for under-floor heating

Board specification
Sound reduction	20dB
Board size
Board size	856mm x 600mm
Board thickness	5mm
Pack size
Boards per pack	19
Area per pack	9.76 square metres
Installation
Installation method	Loose-lay the boards across the sub-floor with no gaps showing - no adhesive necessary
Suitable for use with under-floor heating	Yes
Vapour barrier required	Yes, if being laid on a concrete sub-floor