Open the pack which should contain the 3-in1 profile to match your floor, the pvc channel which the profile locates into, and the plugs and fixing screws. | |
Use a screwdriver to prise open the profile to the actual profile you want - i.e. 'T' section, ramp or end profile | |
Work the screwdriver along until you have the profile you want | |
Fix the pvc channel in place using either the plugs and screws provided or an adhesive such as Griptight. Remember to allow for the expansion/contraction gap wherever required. | |
Press whichever profile you've made in step 2 above into the pvc channel and that's it - you're good to go! |
The amazing 3-in-1 profile for door thresholds and trims - available to match all Pure LVT floors!
This extraordinary profile can be used as a 'T' section for joining vinyl to vinyl (for instance across doorways); or as a ramp profile for finishing off the edge of your floor; or as an end profile for finishing along a wall or along the bottom of a patio door. There's enough for two standard width single doorways or one double doorway in one length.
Key features:
- 2000mm long x 49mm wide x 10mm high - enough for two standard width single doorways or one double doorway
- Cuts into a 'T' section or an adaptor, or a ramp, or an end profile
- Plastic fixing channel included
- Simple to install
- Available to match all Pure LVT floors
Threshold/trim profile details | |
Size | Overall size - 2000mm x 49mm x 10mm |
Material | Water-resistant vinyl decor layer bonded onto an MDF core |
Pure LVT 3-in-1 Profile
- Product Code: 3in1pro
- Availability: In Stock
-
£46.08 /length
- exc VAT: £38.40 /length