	Roll out the underlay with the logo uppermost, making sure that there are no gaps and that the edges of the underlay butt up tight to each other. No adhesive is necessary and a Vapourstop tape should be used to seal the edges together. Lay the underlay parallel to the direction of the LVT floor.
	Lay the LVT floor on top without any adhesive (i.e. as a floating floor) and click the joints together.

A pressure-resistant, sound-absorbing, 1.2mm thick recycled polyester underlay, ideal for floors in upstairs rooms and apartments!

This pressure-resistant foam underlay has been specifically designed to reduce noise in neighbouring rooms so it's ideal upstairs rooms and apartment floors. Just roll it our across the room making sure the edges butt up to each other, and then lay your new floor on top.

Key features:

1.2mm thick pressure-resistant 70% recycled polyester foam
15.31 metres long x 0.98 metre wide - 15 square metres per roll
Excellent sound insulation - dB rating = 21dB
Excellent heat transfer and ideal for use with underfloor heating
Designed for use on all sub-floors
Loose lay - does not need to be glued down

Roll details
Roll size	15.31 metres x 0.98metre - 15 square metres per roll
Roll thickness	1.2mm
Material	70% recycled polyester
Sound reduction	21dB
Installation
Installation method	Roll out across the sub-floor with the logo uppermost. Make sure there are no gaps and that the edges butt up to each other. No adhesive is necessary and use a Vapourstop tape to seal the edges together. Lay the roll parallel to the direction of the LVT floor.
Suitable for use with under-floor heating	Yes