Cut the beading to length, mitring the corners, and either pin or glue it to the existing skirting or wall. Do NOT pin or glue the beading to your floor - your floor must be allowed to move freely underneath the beading.
Gluing is best so use an adhesive with good grab strength. Where the length of the beading required exceeds the length of the beading (i.e. 2400mm), either butt the two lengths tight up to one another or cut one length at 45º and the other at 135º and glue together.
Wherever necessary, return the beading as shown in the diagram rather than leaving an exposed edge.
A solid oak scotia beading available in either a standard oak UV satin-lacquered finish OR as an exact match to your chosen floor. The perfect finish around the edge of your room!
The ideal solution for finishing off your floor and getting that professional look.
- 2700mm x 19mm x 19mm oak scotia beading, ideal for finishing off around the edge of a room
- Solid oak end section available in either a standard UV satin-lacquered finish OR as an exact match to your chosen floor
- Easy to fit - use Griptite to glue to your skirting boards
- Covers the standard expansion/contraction gap with ease
|Threshold/trim profile details|
|Size||Overall size - 2700mm x 19mm x 19mm|
|Material||Solid oak oak scotia beading available in either a standard UV satin-lacquered finish or as an exact match to your chosen floor|
|Installation method||Apply a bead of Griptite to the rear of the section and then press in place against the skirting board. N.B. Do NOT glue to the floor - your floor must be allowed to move freely under the scotia beading.|
2700mm Oak Scotia Beading
- Product Code:MOS191S
- Availability:In Stock
- exc VAT:£10.01 /length